Nostalgic Warehouse 726074 Classic Interior Mortise Rosette Ranking integrated 1st place Crys $133 Nostalgic Warehouse 726074 Classic Rosette Interior Mortise Crys Tools Home Improvement Hardware Door Hardware Locks $133 Nostalgic Warehouse 726074 Classic Rosette Interior Mortise Crys Tools Home Improvement Hardware Door Hardware Locks Nostalgic Warehouse 726074 Classic Interior Mortise Rosette Ranking integrated 1st place Crys Tools Home Improvement , Hardware , Door Hardware Locks,Warehouse,Crys,Classic,www.san-lorenzo.jp,$133,Mortise,/emotive1249249.html,Nostalgic,726074,Rosette,Interior Tools Home Improvement , Hardware , Door Hardware Locks,Warehouse,Crys,Classic,www.san-lorenzo.jp,$133,Mortise,/emotive1249249.html,Nostalgic,726074,Rosette,Interior
|
|
|
|
|---|---|---|
PassageKnobs turn and operate a latch but don’t lock. Typically used on interior doors or doors with a separate deadbolt. Ideal for closets, hallways or rooms where no locking mechanism is needed. Standard door thickness range: 1-3/8 to 1-3/4 inches thick. |
PrivacyLatch with locking mechanism. A privacy pin next to the knob or lever provides locking through the plate or rosette. Ideal for bathrooms, bedrooms or rooms where a locking mechanism is needed. Standard door thickness range: 1-3/8 to 1-3/4 inches thick. |
Doubly DummyTwo door sets with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts). Note: Surface mounted or thru-bolted. |
|
|
|
|
|---|---|---|
Single DummyDoor set for one side of door with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts). Note: Surface mounted. |
Interior MortiseA mortise lock is a lock that requires a pocket – the mortise – to be cut into the door. The lock is installed into the pocket in the edge of the door. If your door is not already prepared for a mortise lock, you (or a skilled professional) will have to use a mortise saw to cut into the door so the lock fits properly. Our mortise locks fit 2-1/4 inches Backset and include a skeleton key locking mechanism. |
|
When installing a tubular latch with passage or privacy function, it's very important that you know what your backset measurement is - either 2-3/8 or 2-3/4 inches. (see graphic).
The backset is the distance from the edge of the door to center of the 2-1/8 inches (54 millimeter) diameter bore hole.
In the U.S., there are two common backsets for residential door locks, 2-3/8 or 2-3/4 inches.
Dummy sets have no latch and are surface mounted, therefore a backset measurement is not needed.
Nostalgic Warehouse Interior Mortise locks are only offered in 2-1/4 inches backset. Our mortise locks are recommended for interior use only.